Application Features The evaluation board, DB2320 is offered for a 28 to 3.3 volt, DC 6 amp power supply. Contact us for additional information regarding your specific requirements.
Search Results for: power
New power supply board MCE DB2320 – 28v to 3.3v, 6A
An evaluation board, DB2320 is offered for a 28 to 3.3 volt, DC 6 amp power supply. Contact us for additional information regarding your specific requirements.
Higher Current Ratings & New Power Factor Correction Inductors
New higher current ratings for ECHL and EDHL Nickel Powder Toroidal Swinging Chokes. Both the ECHL and EDHL Series chokes are offered for use in high-frequency DC power-supply applications and also for AC applications which require linearity and temperature stability. The cores permeability is stable within ±1% over -55 to +85°C temperature range. These Chokes are designed to meet MIL-PRF-27 […]
mCatalog
EP Cores dc chokes flyback transformers high frequency transformers telecom transformers EP Cores Encapsulated flyback transformers push-pull transformers ul compliant Pot Cores Encapsulated common mode chokes pot core chokes Pot Cores custom chokes dc high frequency transformers adjustable inductors Sine Wave Inverter standard part 28vdc to 115vac, 400 hz, 8.6 watt custom high frequency E-Cores flyback […]
Magnetic Circuit Elements Featured in Avionics Magazine
Magnetic Circuit Elements is proud to be featured in an article written by Walter Shawlee, “The Value of Inductive Parts in Avionics Design” in the May 2013 Avionics magazine. To see a complete archive of Shawlee System Design columns, visit Aviationtoday.com/shawlee
Laminated Chokes
APPLICATION FEATURES Laminated Chokes are typically rated in terms of max DC current, DC resistance, inductance, and a voltage rating. MCE offers a miniature DC filter choke in the OC18CL series. In addition, MCE offers a series of chokes, primarily for use in DC power-supply smoothing-filter applications in two series: 1) the linear FL series and 2) the […]
Nickel Powder (MPP) Toroidal Chokes
APPLICATION FEATURES Both the ECHL and EDHL Series chokes are offered for use in high-frequency DC power-supply applications and also for AC applications which require linearity and temperature stability. The cores permeability is stable within ±1% over -55 to +85°C temperature range. These Chokes are designed to meet MIL-PRF-27 Grade 5 Class S (130°C) requirements. […]
Adjustable Inductors
MANUAL ADJUSTABLE INDUCTORS Pot cores are available in a wide range of sizes with adjusting screws. Typical adjusting range is 15% with some as high as 30%. Pot cores with small gaps provide the largest range. Pot cores with large gaps have a smaller adjustment range; but, provide the best resolution and long term stability. […]
High Temperature Iron Powder Toroidal Chokes
APPLICATION FEATURES The PL Series Chokes are offered for use in high-frequency power-supply applications at a lower cost than nickel powder cores. This series may be vertically mounted to minimize board space. The PL series can also be used for Power factor Correction Inductors. Contact MCE engineering with maximum voltage and minimum frequency for the application […]
E – Core Chokes
FEATURES Both the ODBL and OCBL Series Filter Chokes are offered for use in high-frequency DC power supply applications including switching regulators, flyback circuits, and solar inverters. The principal feature of this series is relatively low cost provided by the PC bobbin or Self leads, ferrite E-cores, and open type construction. High energy storage (LI²) […]